全國統一熱線：021-32205893
MADAS馬達斯安全閥，MADAS湖南總代理
德國MADAS馬達斯安全閥VICO - VICP - VIC
P.MAX 1 BAR
安全閥具有積極作用，不由外部動力操作，旨在攔截燃油流向燃燒器以避免水溫，在系統的輸送回路上達到沸點溫度值。
閥門的關閉是由以下原因引起的：
毛細管和/或燈泡傳感器穿刺或切割。警告：在這種情況下，作為正動閥，不可能重新設置閥門。
增加水溫直到達到設定值。在這種情況下，只有當溫度從產品標簽上規定的設定值降低至少10°C時才可以復位閥門
根據PED 2014/68 / EU指令
（前97/23 / EC）
I.N.A.I.L.認證和校準
根據2009年“RACCOLTA R”版本的認證 - DM 1.12.75 Titolo II的應用技術規格。
與每個閥門一起提供校準語言的原始副本。
本文件除了閥門技術文件外，還包含在密封件中報告的注冊號太固定在閥體上。該文件由I.N.A.I.L.密封和驗證。技術員誰出席了calybration。我們建議保持非常仔細，如果丟失，不可能釋放任何副本。
根據指令97/23 / EC（PED指令）
I.N.A.I.L.認證和校準
根據2009年“RACCOLTA R”版本的認證 - DM 1.12.75 Titolo II的應用技術規格。
MADAS馬達斯安全閥，MADAS湖南總代理
VICO - VICP - VIC
P.MAX 1 BAR
Safety valve with positive action, not operated by external power, manufactured with the aim to intercept the fuel flow to the burner to avoid the water temperature, on the delivery circuit of the system, reach the boiling temperature value.
The closure of the valves is caused by:
Capillary and/or bulb sensor puncture or cut. WARNING: Being positive action valves in this case it is not possible to reset the valve anymore.
Increasing of the water temperature till reaching the setted. In this case it is possible to reset the valve only if the temperature decreases of at least 10°C from the setting value stated on the product label
According to the Directive PED 2014/68/EU
(ex 97/23/EC)
I.N.A.I.L. Certified and calibrated
Certified according to "RACCOLTA R" ediction of 2009 - Application technical specifications of DM 1.12.75 Titolo II.
Together with every single valve an original copy of the calibration verbal is supplied.
This document, in addition of the valve technical documentation, contains also the registration number reported in the seal too fixed on the body valve. The document is sealed and validated by the I.N.A.I.L. technician who attended the calybration. We suggest to keep it very carefully as in case of loss it is not possible to release any copies.
According to the Directive 97/23/EC (PED directive)
I.N.A.I.L. Certified and calibrated
Certified according to "RACCOLTA R" ediction of 2009 - Application technical specifications of DM 1.12.75 Titolo II.
MADAS馬達斯安全閥，MADAS湖南總代理
|
||
|
||
 |
